|
|
|||||
| Freedom Back System | |||||
| Frequency Range and Transmitter Output Level | |||||
| Bands: |
UA
|
UB
|
|||
| Frequency Range: |
584 ~ 608 MHz
|
655 ~ 679 MHz
|
|||
| Transmitter Output Level: |
10 dBm
|
10 dBm
|
|||
| Channels: |
120 (10 groups of 12 channels)
|
(10 groups of 12 channels)
|
|||
| Operating Range: | 330 ft (100 m) line of sight, under typical conditions Note: Actual range depends on RF signal absorption, reflection, and interference. |
||||
| Frequency Response (+/- 3 dB): | 40 Hz ~ 16 KHz |
||||
| Total Harmonic Distortion (+/- 30 KHz deviation, 1 KHz tone): | <1% | ||||
| Dynamic Range: | >90 dB A-weighted | ||||
| Operating Temperature Range: | -10°C to +50°C Note: Battery characteristics may limit this range |
||||
| Transmitter | |||||
| Max Audio Input Level: | +6 dBV, +18 dBV with -12dB PAD engaged |
||||
| Gain Adjustment Range: | 60 dB | ||||
| Input Impedance: | 10 K Ohms unbalanced, 20 K Ohms balanced | ||||
| Physical | |||||
| Dimensions: | 1.5” H x 8.35” W x 3.78” D (38mm H x 212mm W x 96mm D) | ||||
| Weight: | 1.34 lbs (0.6 kg) | ||||
| Power Requirements: | 12-18 VDC at 300 mA, supplied by external power supply | ||||
| XLR Input: | Balanced Pin 1 = Shield Pin 2 = + Audio Pin 3 = - Audio |
||||
| TRS Input: | Tip = + Audio Ring = - Audio Sleeve = Shield |
||||
| Wireless Stereo Receiver | |||||
| Audio Output Level: | 100 mW |
||||
| Sensitivity: | -94 dB for 30 dB SINAD, typical |
||||
| Image Rejection: | >55 dB |
||||
| Physical | |||||
| Dimensions: | 3.74” H x 2.56” W x 0.98” D (95mm H x 65mm W x 25mm D) | ||||
| Weight: | 3.52 oz (100 g) without batteries | ||||
| Power Requirements: | 2 “AA” size Alkaline or rechargeable batteries | ||||
| Battery Life: | Approximately 4 ~ 5 hours (alkaline), load and level dependent | ||||
| 0 dBu = 0.775 Vrms | |||||
| *Note: Specifications and features subject to change without notice. | |||||