This is it – the simplest, most affordable digital solution to get everyone the mix they need to perform their best. This new system platform is completely modular and infinitely expandable, which means it has become the last personal monitoring system you’ll ever need.
With this system, there is no learning curve. Whether or not you’ve ever used a personal monitor mixer, the simple layout of this powerful system makes getting the right mix a quick and effortless experience. Based in Gigabit Ethernet, this framework paves the way for an impressive range of future possibilities.
The Hear Back PRO system consists of two main components: the Hub and the Mixer. The modular Hub consists of four card slots, which can be populated with any configuration of input and/or output cards to fit your exact needs. Each Hub has the ability to supply signal and power to as many as 32 Mixers (8 per Network Card), each over a single standard Cat5E/6 cable. And with the built-in HBus In/Out ports, multiple Hubs can be daisy-chained together, allowing for truly unlimited system expansion.
The Hear Back PRO system is available in a Four Pack as well as offering Mixers and Hubs separately.
The Hear Back Mixer is equipped to mount to any standard mic or desk stand using the built-in 5/8" threaded socket located on the back of the mixer.
A single Hub supplies signal and power to a maximum of eight Mixers. To expand your system, the Hubs can be daisy-chained using the HearBus In/Out for virtually unlimited system size. The Hub accepts analog input signals from an audio mixer such as auxiliaries, matrix outs, sub outs, monitor outs, and/or direct outputs. The ADAT input can come from digital audio workstations, digital recorders, or digital mixers.
Virtual Mixer I/O card for the HB PRO Hub boasts all the features of the HB PRO Mixer and is controlled via the new Hear Back PRO iOS app or another PRO Mixer. The Virtual Mixer card can also be used for TALK BACK AT A CONSOLE.
Allows HB PRO Hub to communicate with audio equipment via ADAT protocol.
Allows HB PRO Hub to communicate with pro audio equipment using multi-channel AES/EBU protocol.
Allows HB PRO Hub to communicate with any audio equipment using Dante protocol.
Allows HB PRO Hub to communicate with any pro audio equipment that uses Waves SoundGrid. Our partnership with Waves makes it easy to directly connect the Hear Back PRO system to other high-end audio equipment (including directly out of a PC or Mac using only its Ethernet port).
Allows HB PRO Hub to communicate with any professional analog audio equipment. Provides (8) balanced audio inputs using a standard Tascam DA-88-style pin-out on a DB25 connector. A DB25 to 1/4-inch TRS break-out cable is sold separately, unless the Analog input card is purchased as part of the Hear Back PRO Four Pack.
Provides (8) RJ45 Gigabit Ethernet ports for connecting Hear Back PRO Mixers, PRO Mixer Distros, or other Hear Back PRO Hubs. Each port provides PoE+ power and digital audio over a single Cat6 Ethernet cable that can be run up to 566 feet.
Network Cards can be used with Hear Back PRO Hubs (up to 4 can be populated in a single Hub) or PRO Mixer Distros.
|Mixer Aux Input|
|Line Input Configuration / Impedance:||1/8” Stereo, unbalanced, 10K ohms typical|
|Line Input Level:||0 dBu optimal, +18 dBu max|
|Mic Input Configuration/Impedance:||XLR Mono, balanced, 150 ohms typical, 150 Hz high pass|
|Mic Input Level:||-42 dBu optimal, -30 dBu max|
|Mixer Headphone Power|
|Load Impedance:||THD less than 0.01%*||THD less than 0.1%|
|8 Ohms:||1.2 W*||1.5 W|
|*THD AT 8 Ohms = 0.015% typical|
|16 Ohms:||1.6 W||1.8 W|
|25 Ohms:||2.0 W||2.2 W|
|32 Ohms:||1.8 W||2.0 W|
|50 Ohms:||1.5 W||1.6 W|
|100 Ohms:||1.1 W||1.2 W|
|200 Ohms:||500 mW||650 mW|
|600 Ohms:||220 mW||250 mW|
|IMD:||Typically Less than 0.03%||Mixer Line Output|
|Freq Response:||20 Hz to 20 KHz, +/-0.15 dB|
|THD+N:||0.004% typical at 1 kHz, +15 dBu|
|0.008% typical, 20 Hz - 20 kHz, +4 dBu|
|IMD:||0.02% typical at +4 dBu, 60 Hz / 7 kHz|
|Crosstalk:||Less than -93 dB @ 1 kHz|
|Propagation Delay:||Less than 0.25 mSec @ 192 kHz sample rate||System Noise Performance|
|Noise, A-Weighted:||-93 dBu @ 192 kHz sample rate|
|Dynamic Range:||117 dB typical||System I/O|
|Hub Line In, 2x Analog Input Cards:||16 Balanced inputs on 2x DB-25 female (DA-88 pinout)|
|Hub Maximum Input Level, Analog:||+18 dBu|
|Hub HBus In, Out:||8-pin RJ45 jack (standard Ethernet pinout)|
|Hub USB Port:||USB 2.0 (for firmware updates)|
|Hub Card Slots (4x):||Each slot can accept an analog or digital input card, output card, or 8 port Mixer network card|
|Mixer to Hub Connection:||8-pin RJ45 jack (8x Mixer connections per network card)|
|Mixer Headphone Out:||TRS 1/4” and 1/8” unbalanced stereo|
|Mixer Line Out:||TRS 1/4” balanced (2 connections: left/mono and right)|
|Mixer Max Output Level, Analog:||+24 dBu (mixed output)|
|Mixer Aux Input:||TRS 1/8” unbalanced stereo and XLR balanced mono (with 15 volts phantom power)|
|Mixer Card Slot:||For future digital or analog input/output expansion capabilities or side-car add-on||Physical, Mixer|
|Size:||9.5” (241 mm) H x 5.95” (152 mm) W x 2.71” (68.8 mm) D|
|Unit Weight:||1.6 lb. (0.72 kg)|
|Mounting:||Standard mic stand (5/8” 27 threads per inch) or desk mounted||Physical, Hub|
|Size:||1.75” (44.5 mm) H x 19” (483 mm) W x 8.5” (216 mm) D|
|Unit Weight:||6.3 lb. (2.8 kg)|
|Mounting:||Standard rack mount, 1 RU||Power|
|Hub Power Requirements:||48VDC, 150 Watts (each external power supply powers up to 16 Mixers)**|
|Mixer Power Requirements:||Power over Ethernet (PoE) 36-52 volts DC, 15 Watts max provided by Hub through Cat5e/6 network cabling|
|External Power Supply Requirements:||Input Voltage: 90VAC to 264VAC 50/60 Hz|
Note: 0 dBu = 0.775 Vrms. Specifications and features subject to change without notice.
**Hub is capable of powering up to 32 Mixers with an additional power supply.
Control Hear Back PRO Mixers, simply by connecting your PRO Hub to a wireless network!
If you need help from our highly skilled Tech Support, the easiest and quickest way to get your solution is by phone. Hear Technologies is committed to providing you the industry's best customer service.Max Sulkowski
For more information please see our Support page.