Skip to main content

System Accessories

PRO Distro​

  • A rugged PoE+ gigabit network switch for Dante, Waves SoundGrid, or any other Ethernet application.
  • Works with our Hear Back PRO, Switch Back M8RX, and Switch Back PLUS.
  • When used with the Hear Back PRO system, allows a single CAT6 cable to be run from a Hear Back PRO Hub to the stage/studio where the PRO Mixers are located (unlimited daisy-chaining possible with multiple Distros).
  • Provides (8) RJ45 gigabit Ethernet ports with PoE+ power for powering up to 8 PoE+ devices. A ninth port is included to link multiple Distros together, connecting to another network switch, or when using with the Hear Back PRO system, it can connect to the HBUS out on a Hear Back PRO Hub.
  • Durable anodized housing available in black or silver finish.
  • Not compatible with original Hear Back or OCTO Mixers.
Distro

Gigabit PoE Power Injector​

  • Works with the Switch Back PLUS, Switch Back M8RX, and Hear Back PRO mixers.
  • The Gigabit POE Power Injector provides 18 watts of 48 volt PoE+ power @ 375mA.
  • The supply is universal, and can handle voltage inputs anywhere from 90 to 264 VAC, 50 or 60Hz.
  • Includes (1) Universal Power Supply, (1) Power Cord, and (1) RJ45 Breakout Cable (standard T-568-B pinout).
Gigabit PoE Injector

AM12 Ambient Microphone​

12 inch condenser gooseneck mic with super cardioid pattern for use with Hear Back PRO Mixer as an ambient or intercom microphone.

The AM12 features 15 volt phantom power, 30Hz – 16kHz frequency response, and -40dB sensitivity.

Microphone Pattern
Microphone

Mixer Tilt Adapter​

The Mixer Tilt Adapter is for all Hear Back Mixers adding a ball joint with 5/8" 27 male threading to any standard mic stand to get the perfect angle with 360° rotation and 180° tilt.

Tilt Adapter

Microphone Stand Adapter​

Mount the Hear Back Mixer to the side of any mic stand or standard music stand using the MSA Mic Stand Adapter.

This clamp-on adjustable width bracket attaches to the built-in 5/8" threaded socket located on the back of the Mixer.

Stand Adapter

Tote Back​

This soft-side nylon carrying case is perfect for carrying (8) Hear Back Mixers or Switch Back M8RXes. It can also carry (4) Mixers and (1) Hub. Adjustable dividers allow you the freedom to customize the compartments.

Tote Back